Customized Meshes Italy
Table of content
The product
Thanks to very modern equipment, La Veneta Reti manufactures special customized meshes for Italy (made-to-measure) according to customers’ needs with no limits with reference to mesh openings or bar diameters (which are variable within the same type).
Panel geometry and size can be varied in addition to the diameter and length of steel rebars – which can also be coupled. Therefore, these products can meet any design requirements.
To improve durability, these meshes can be zinc-coated, which makes the structure safer. This broad range of products can be applied to both architectural heritage restoration and protection works and the erection of new durable structures.
The customized meshes produced in Osoppo obtained the EPD Certification – Environmental Product Declaration – by the certifying partner ICMQ, the Institute for certification and quality branding for products and services for construction.
The Pittini Group’s 3 Italian production facilities also produce a wide range of standard electro-welded wire mesh for the Italian market.
Type B450C
| MECHANICAL AND SIZE CHARACTERISTICS | |||||||||
| Steel grade | Range of diameters [mm] |
Weight tol. [%] | Re min [MPa] | Rm min [MPa] | Rm/Re min | Rm/Re max |
Re/Re nom |
Agt min [%] | Rt min [%] |
B450C |
6 ÷ 24 | ± 4.5 | 450 | 540 | 1.15 | 1.35 | 1.25 | 7.5 | 25 |
REMARKS:
– Weight tolerance: for diameters up to 8 mm ±6%
– Tests made after artificial ageing according to Ministerial Decree D.M. 17/01/2018
– Tolerances: according to UNI EN 10080:2005
| DESCRIPTION OF PARAMETERS | Min [mm] | Max [mm] |
Width |
600 | 3200 |
Length |
1500 | 14000 |
Transversal diameter |
6 | 16 |
Longitudinal diameter
|
6 | 24 |
Distance between longitudinal bars |
75 | 330 |
Distance between transversal bars |
75 | 330 |
Type B450A
| MECHANICAL AND SIZE CHARACTERISTICS | ||||||||
| Steel grade |
Range of diameters [mm] |
Weight tol. [%] | Re min [MPa] | Rm min [MPa] | Rm/Re min | Re/Re nom | Agt min [%] | Rt min [%] |
B450A |
5÷10 | ±6 | 450 | 540 | 1.05 | 1.25 | 2.5 | 25 |
REMARKS:
– Weight tolerance: for diameters larger than 8 mm ±4.5%
– Tests made after artificial ageing according to Ministerial Decree D.M. 17/01/2018
– Tolerances: according to UNI EN 10080:2005
| DESCRIPTION OF PARAMETERS | Min [mm] | Max [mm] |
Width |
600 | 3.200 |
Length |
1500 | 14.000 |
Transversal diameter |
5 | 10 |
Longitudinal diameter (variable within the same type) |
5 | 10 |
Distance between longitudinal bars |
75 | 330 |
Distance between transversal bars |
75 | 330 |
Sales Organization
A continuous and reliable service is guaranteed by Pittini Group’s Sales Department.
Contact our designated representative: